透水磚在鋪設過程中是否需要掛漿取決于具體的施工要求和透水磚的類型。以下是兩種常見的透水磚鋪設方法：

　　Whether to hang grout during the laying process of permeable bricks depends on specific construction requirements and the type of permeable bricks. The following are two common methods for laying permeable bricks:

　　直接鋪設 ：

　　Direct laying:

　　有些透水磚設計為可以直接鋪設，不需要在磚塊之間添加水泥漿。

　　Some permeable bricks are designed to be laid directly without the need to add cement slurry between the bricks.

　　這種透水磚通常具有較好的透水性，可以直接鋪設在經過適當處理的基層上。

　　This type of permeable brick usually has good permeability and can be directly laid on a properly treated base layer.

　　需要掛漿 ：

　　Need to hang slurry:

　　另一些透水磚在鋪設時需要在磚塊之間添加水泥漿，以確保磚塊之間的穩固連接。

　　Other permeable bricks require the addition of cement slurry between the bricks during installation to ensure a stable connection between them.

　　這種透水磚可能設計為需要額外的支撐或固定，以確保鋪設后的結構穩定。

　　This permeable brick may be designed to require additional support or fixation to ensure structural stability after installation.

　　因此，對于透水磚是否需要掛漿，最佳的做法是參考磚塊制造商提供的說明或咨詢專業的施工人員，以確保鋪設的質量和透水磚的性能

　　Therefore, the best practice for whether permeable bricks need to be grouted is to refer to the instructions provided by the brick manufacturer or consult professional construction personnel to ensure the quality of laying and the performance of permeable bricks

　　本文由山東透水磚提供幫助，更多的相關內容請點擊：http://www.j2686.cn 希望本文能夠?yàn)槟鷰?lái)幫助，感謝您的閱讀！

　　This article is assisted by Shandong permeable bricks. For more related content, please click: http://www.j2686.cn I hope this article can be helpful to you. Thank you for reading!